QuickSAT Video Guides

See how easy it is to set up the QuickSAT systems with our video guides below.

QuickSAT Demonstration video.

QuickSAT QS65 and free to air receiver.

QuickSAT QS65 and TV with integrated free to air receiver.

QuickSAT QS65 and Sky receiver.

QuickSAT QS80 and TV with integrated free to air receiver.

QuickSAT User Manuals

Download QuickSAT user manuals in PDF format below.

QuickSAT QS45

QuickSAT QS65

QuickSAT QS80

Finding your elevation

Online tools and phone/tablet apps.

Elevation tables (Astra 2E and Astra 2F at 28.2°E)

Coverage

Coverage map

Reception reports

Troubleshooting

I don't hear any sound through the QuickSAT speaker.

If there is no sound check you have the batteries in the speaker correctly and that it is turned on. Check all your connections again and make sure that you are plugged into the audio out or headphone out of your TV and not the audio input.

To check the sound from your television to the speaker you can try playing a DVD on your TV and see if you can hear it through the speaker.

A simple test to check that the speaker is working OK and that the batteries are good is to plug the speaker into the headphone output of either your phone or a portable audio device. Then play some music or video to check you can hear it through the speaker.)


Calibrating the elevation meter.

Under normal circumstances the meter should not need calibrating, however if you find this necessary it can be done as follows:

1. Turn the meter off and put it on a flat, smooth surface.
2. Press and hold the ON/OFF and HOLD buttons until CAL shows on the display turns on and then release.
3. Keeping the meter still press the HOLD button until CAL1 shows on the display.
4. Rotate the meter by 180 degrees then press the HOLD button until CAL2 shows on the display.
5. When CAL2 disappears the calibration is complete and the LCD will show the current angle.